• Active studio monitor with 6.5″ LF driver and 1″ HF driver
• Glass fiber speaker cone designed by KRK founder and master designer Keith R. Klawitter
• 150-watt bi-amped design serves up powerful, clear sound
• Fine-tune the response to your specific room with LF, HF, and Room Compensation EQ controls
• Easy to integrate into any system with XLR, TRS, and RCA inputs

Audio-Technica AT2050 Multi-Pattern Large Diaphragm Condenser Microphone.

An affordable dual diaphragm microphone suitable for many applications.

The versatile Audio-Technica AT2050 is a multi-pattern large diaphragm condenser microphone that provides consistent, superior performance. The AT2020 mic offers you switchable cardioid, omnidirectional and figure-eight polar pattern settings. The AT2050 mic’s dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the Audio-Technica AT2050 microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.

AT2050 Multi-Pattern Large Diaphragm Condenser Microphone Features:

• Three switchable polar patterns: omni, cardioid, figure-of-eight
• Switchable 80 Hz high-pass filter and 10 dB pad
• Large diaphragm for smooth, natural sound and low noise
• State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
• Includes shock mount & protective pouch.

AT2050 Multi-Pattern Large Diaphragm Condenser Microphone Specifications:

• Element: Externally-polarized (DC bias) condenser Externally-polarized (DC bias) condenser
• Polar Pattern: Cardioid, Omnidirectional. Figure-of-Eight
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
• Open Circuit Sensitivity: äóî42 dB (7.9 mV) re 1V at 1 Pa
• Impedance: 120 Ohms
• Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
• Noise: 17 dB SPL
• Dynamic Range (Typical): 132 dB, 1 KHz At Max SPL
• Signal-To-Noise Ratio: 77 dB, 1 KHz At 1 Pa
• Phantom Power Requirements: 11-52v DC, 4.7 Ma Typical
• Switches: Flat, Roll-Off; 10 dB Pad (Nominal)
• Weight: 412 G (14.5 Oz)
• Dimensions: 170.0 mm (6.69″) Long, 52.0 mm (2.05″) Maximum Body Diameter
• Output Connector: Integral 3-Pin XLRM-Type
• Accessories Furnished: AT8458 Shock Mount For 5/8″-27 Threaded Stands; 5/8″-27 To 3/8″-16 Threaded Adapter; Soft Protective Pouch
• Audio-Technica Case Style: R5.

Behringer C4 Single Diaphragm Condenser Microphone

C-4 microphones are built to capture the performance of a choir, piano or any other vocal or acoustic sound source to provide a beautiful true-to-life sound. Sold in perfectly matched pairs, these outstanding condenser mics are especially great for live applications because their non-reflective finish eliminates unwanted glare caused by stage lighting.

What is a Condenser Microphone?

A condenser mic is the ideal choice for capturing vocals or acoustic instruments, either in live or recording settings. By their very nature, condenser microphones are much more sensitive than dynamic microphones, enabling them to pick-up even the subtlest of signals. Thanks to their cardioid (heart-shaped) pattern, C-4 microphones pickup your source signal while rejecting off-axis sounds that can ruin an otherwise perfect recording. Another difference between condenser and dynamic mics is they contain active circuitry that requires phantom power (+48 V DC) for operation. You can power them from any phantom power equipped BEHRINGER XENYX mixer, plus enjoy the benefits of our state-of-the-art XENYX mic preamps.

Sound That Astounds

Every stitch of these mics is designed to deliver beautiful sound. Beginning with the gold-plated 3-pin XLR connector, you get the highest signal integrity.

Once they are connected to your sound system, youäó»ll notice these twin pro-caliber microphones have exceptional frequency response (an average boost of 4dB between 1kHz- 8kHz). For those of you who are new to condenser mics, this basically means you’ll get a slightly brighter sound that will give the perfect shape to cymbals and overhead miking. Acoustic pianos and choirs will also benefit greatly from this frequency response.

The cardioid pickup pattern provides unparalleled sound source separation and feedback rejection. C-4 mics contain ultra low-noise transformerless FET input circuitry that can handle extreme dynamics (from 20 Hz to 20 kHz) and has a maximum sound pressure level of 136 dB. So even if the featured performer at your next recording session or live show happens to be a revved-up jet engine, this workhorse mic will not distort!

C-4 mics also feature a switchable low-frequency rolloff to eliminate infrasonics (mic handling noise, nasty sound created by creaky stages), as well as a switchable -10 dB input attenuation to accommodate for hot signals, such as a really loud vocalist or overzealous cellist.

But Wait, There’s More

The C-4 mics not only sound great, they come packed with custom stand adapters, windscreens, a stereo bar for mounting both mics in stereo alignment, and a transport case. As soon as you break them out of the box, these mics are ready to become a mind-blowing addition to your sound arsenal.

Behringer C4 Condenser Mic Features:

• 2 matched condenser microphones for stereophonic studio recording and live applications
• Ideal as main and support microphones for studio and live applications
• Cardioid pickup pattern for effective feedback elimination
• Low-mass diaphragm for ultra-wide frequency response and ultimate sound reproduction
• Switchable low-frequency roll-off and input attenuation
• Ultra low-noise transformerless FET input eliminates low-frequency distortion
• Ultra-rugged construction with metal die-cast body
• Gold-plated 3-pin XLR connector for highest signal integrity
• Stand adapters, windscreens, stereo-bar and transport case included
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany.

Behringer B5 Gold-Sputtered Diaphragm Studio Condenser Microphone Overview:

The single-diaphragm B-5 microphone is a home recording enthusiast’s dream come true! The B-5 comes with interchangeable cardioid and omnidirectional capsules, making it a fantastic all-purpose condenser microphone. It is designed to capture your sounds with incredible realism, sensitivity and accuracy, and is perfect for acoustic instruments, vocals and overhead miking – and rugged enough to go the distance! With a heavy duty suspension mount and windscreen included in the sleek aluminum case, the B-5 just may be the only microphone your studio will need.The B-5 mic is capable of capturing much more detail than most dynamic microphones because of its wider and flatter frequency response. Why the B-5?The B-5 is an affordable, high-quality way to put a gold-sputtered diaphragm condenser mic to work for you. It comes with two interchangeable capsules: omnidirectional for picking up sound on all sides of the mic, and cardiod for picking up the source signal while shunning off -axis sound. With its excellent transducer and gold-plated XLR output, the B-5 is very neutral sounding and truly delivers on the promise of noise-free transmission. It also features a switchable -10 dB attenuator to capture high-volume signal sources without distorting, as well as a low-cut filter to eliminate infrasonics caused by floor rumble and other turbulance.But That’s Not All…The B-5 condenser microphone is designed to be your go-to studio mic for many years to come. The tough, die-cast metal body can withstand the rigors of all those late-night recording marathons – and the included carrying case ensures your B-5 always travels in safety and style.An excellent choice for both live and recording applications, the studio-grade B-5 condenser microphone is available at a price that will leave enough cash left over to secure other recording essentials. Features: